Brand
Search Results
ADAPTER FLRE 3/8 X 1/4IN BRS DOM 3000PSI
JB machines all of the brass fittings at the factory in Aurora, Illinois using the highest level of brass, Many import fittings use lower quality brass with lower copper content and higher failure rates. Our brass fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.
UNION R22 R32 R134A R290 R410A R507
PRO-Fit™ Quick Connect fittings are designed to connect refrigerant lines without an open flame, brazing or swaging. They are suitable for joining refrigerant lines in seconds after cutting the line, deburring the ends and push to connect.
SOCKET R22 R32 R134A R290 R410A R507
PRO-Fit™ Quick Connect fittings are designed to connect refrigerant lines without an open flame, brazing or swaging. They are suitable for joining refrigerant lines in seconds after cutting the line, deburring the ends and push to connect.
REACTOR MSTRE C 5/8IN 7-3/4IN SOL BRS
The Allin Liquid Eye® moisture reactor is easy to read in minimal light. It provides a quick indication of refrigerant in the tube, as well as the pressure of the moisture. When moisture is present, the color bars on the band within the tube change color.
ADAPTER FLRE 1/2 X 5/8IN BRS DOM 2000PSI
JB machines all of the brass fittings at the factory in Aurora, Illinois using the highest level of brass, Many import fittings use lower quality brass with lower copper content and higher failure rates. Our brass fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material.
ADAPT ADAPT 1/2 X 1/4 IN BRS DOM
JB machines all of the brass fittings at the factory in Aurora, Illinois using the highest level of brass, consisting of 65% copper and 35% zinc. This gives our brass fittings and access valves high tensile strength while resisting corrosion. Many import fittings use lower quality brass with lower copper content and higher failure rates. Our brass fittings may be used with copper, brass, aluminum, steel, and plastic tube provided an acceptable flare could be generated with the material. Vacuum pressures of 5,000 psi can be handled depending on the size, material, and conditions. Using a 4:1 safety factor, the following general rule is used:3,000 psi to 1/4 in, 2,000 psi to 1/2 in, and 1,500 psi to 1 in. Long nuts are recommended when vibration is a factor. Tubing should be double flared in extreme applications to minimize flare thinning on over-tightening. Our brass fittings general comply with SAE, ASA, ASME, and MS standards. Heavy-duty ACR tube fittings generally conform to SAE, ASA
