Search Results

The new BMPlus3000 series of control panels are designed for optimum performance and superior comfort. The BMPlus is expandable up to seven zones using the XM-2 expansion panel. It is also available in the following configurations: BMPlus3000 (3 Zones), BMPlus5000 (5 Zones), BMPlus7000 (7 Zones)Our 50% rule will inhibit second stage of heating or cooling based on the total number of zones calling. More than half of the total zones must be calling to enable second stage. If less than half are calling, the panel will not allow second stage to activate. The intelligent design of the BMPlus does not require the use of a dual fuel kit to be compatible with a dual fuel heat pump. The BMPlus can be set to select staging based on an adjustable time delay or based on outside air temperature. The adjustable stage timer of 5 min. to 47 min. allows single stage thermostats to control two stage systems and heat pumps. The same potentiometer adjusts between 5 F and 47 F for outside air changeover. T

The URD series of round motorized dampers are a double layered blade design with an integrated Poron™ sealing gasket. The superior design insures long life and zero maintenance. URD dampers are easy to install, easy to wire up and come with a 5 year warranty. The URD damper is constructed of heavy 24 ga galvanized steel with factory rolled stiffening beads. The nylon bearings and Thermotuff™ drive shafts insure smooth, quiet operation and provide a thermal barrier to the motor. The URD is designed to operate reliably at static pressures up to 1-1/2 in WC. The UL listed MA-ND5 actuator is a 24 VAC 3 wire power open/power close type rated at 18 in-lb of torque. It includes an integrated wiring terminal block and a NEMA1 rated housing. The MA-ND5 motor features bright green and red LED’s which correspond to the open and closed position of the blade. The motor also includes adjustable end stops for minimum/maximum blade position, that allows for field balancing of the full or minimum CFM f

The URD series of round motorized dampers are a double layered blade design with an integrated Poron™ sealing gasket. The superior design insures long life and zero maintenance. URD dampers are easy to install, easy to wire up and come with a 5 year warranty. The URD damper is constructed of heavy 24 ga galvanized steel with factory rolled stiffening beads. The nylon bearings and Thermotuff™ drive shafts insure smooth, quiet operation and provide a thermal barrier to the motor. The URD is designed to operate reliably at static pressures up to 1-1/2 in WC. The UL listed MA-ND5 actuator is a 24 VAC 3 wire power open/power close type rated at 18 in-lb of torque. It includes an integrated wiring terminal block and a NEMA1 rated housing. The MA-ND5 motor features bright green and red LED’s which correspond to the open and closed position of the blade. The motor also includes adjustable end stops for minimum/maximum blade position, that allows for field balancing of the full or minimum CFM f

The URD series of round motorized dampers are a double layered blade design with an integrated Poron™ sealing gasket. The superior design insures long life and zero maintenance. URD dampers are easy to install, easy to wire up and come with a 5 year warranty. The URD damper is constructed of heavy 24 ga galvanized steel with factory rolled stiffening beads. The nylon bearings and Thermotuff™ drive shafts insure smooth, quiet operation and provide a thermal barrier to the motor. The URD is designed to operate reliably at static pressures up to 1-1/2 in WC. The UL listed MA-ND5 actuator is a 24 VAC 3 wire power open/power close type rated at 18 in-lb of torque. It includes an integrated wiring terminal block and a NEMA1 rated housing. The MA-ND5 motor features bright green and red LED’s which correspond to the open and closed position of the blade. The motor also includes adjustable end stops for minimum/maximum blade position, that allows for field balancing of the full or minimum CFM f

The URD series of round motorized dampers are a double layered blade design with an integrated Poron™ sealing gasket. The superior design insures long life and zero maintenance. URD dampers are easy to install, easy to wire up and come with a 5 year warranty. The URD damper is constructed of heavy 24 ga galvanized steel with factory rolled stiffening beads. The nylon bearings and Thermotuff™ drive shafts insure smooth, quiet operation and provide a thermal barrier to the motor. The URD is designed to operate reliably at static pressures up to 1-1/2 in WC. The UL listed MA-ND5 actuator is a 24 VAC 3 wire power open/power close type rated at 18 in-lb of torque. It includes an integrated wiring terminal block and a NEMA1 rated housing. The MA-ND5 motor features bright green and red LED’s which correspond to the open and closed position of the blade. The motor also includes adjustable end stops for minimum/maximum blade position, that allows for field balancing of the full or minimum CFM f

The URD series of round motorized dampers are a double layered blade design with an integrated Poron™ sealing gasket. The superior design insures long life and zero maintenance. URD dampers are easy to install, easy to wire up and come with a 5 year warranty. The URD damper is constructed of heavy 24 ga galvanized steel with factory rolled stiffening beads. The nylon bearings and Thermotuff™ drive shafts insure smooth, quiet operation and provide a thermal barrier to the motor. The URD is designed to operate reliably at static pressures up to 1-1/2 in WC. The UL listed MA-ND5 actuator is a 24 VAC 3 wire power open/power close type rated at 18 in-lb of torque. It includes an integrated wiring terminal block and a NEMA1 rated housing. The MA-ND5 motor features bright green and red LED’s which correspond to the open and closed position of the blade. The motor also includes adjustable end stops for minimum/maximum blade position, that allows for field balancing of the full or minimum CFM f

Available in round and rectangular sizes, EWC Controls’ model SBD bypass dampers make bypass set-up simpler than ever. No measuring instruments are required. No weights to adjust. No springs to crank. The SBD is ACCA Manual Zr compliant. As an added benefit of the unique blade design and the smart, self-balancing feature of the SBD, there is no need to install and setup a separate bypass balancing hand damper.

The “SAS” supply air sensor allows precise real time monitoring of the supply air temperature on your zoned HVAC system. The SAS wires directly into the BMPlus, NCM300, EWC-300, UZC4 and UT3000 series control panels and senses the supply air temperature in both heating and cooling modes. Using the adjustable potentiometers or LCD menu on the control panel, the installer can set the desired temperature limit set-points on most EWC zoned HVAC systems. This will protect the HVAC equipment from excessive temperature rise or fall during heating and cooling operations. EWC recommends mounting the SAS in the supply air plenum, approximately 6 to 12 in downstream of the heat exchanger or DX coil. Upstream of the electric strip heating elements in heat pump applications. It should also be installed upstream of any bypass duct connection. Some EWC control panels have dual high limit potentiometers which allows mounting the SAS in the discharge plenum, regardless of the DX coil and/or heat exchan

The URD series of round motorized dampers are a double layered blade design with an integrated Poron™ sealing gasket. The superior design insures long life and zero maintenance. URD dampers are easy to install, easy to wire up and come with a 5 year warranty. The URD damper is constructed of heavy 24 ga galvanized steel with factory rolled stiffening beads. The nylon bearings and Thermotuff™ drive shafts insure smooth, quiet operation and provide a thermal barrier to the motor. The URD is designed to operate reliably at static pressures up to 1-1/2 in WC. The UL listed MA-ND5 actuator is a 24 VAC 3 wire power open/power close type rated at 18 in-lb of torque. It includes an integrated wiring terminal block and a NEMA1 rated housing. The MA-ND5 motor features bright green and red LED’s which correspond to the open and closed position of the blade. The motor also includes adjustable end stops for minimum/maximum blade position, that allows for field balancing of the full or minimum CFM f

The “OAS” outside air sensor allows precise real time monitoring of the outside air temperature on your zoned HVAC system. The optional “OAS” wires directly into the BMPlus series, UZC4 series or UT3000 control panels allowing the control system to monitor the outside air temperature. Using the adjustable potentiometer on the control panel or the LCD menu, the installer can set the desired outdoor temperature changeover setting, to engage supplemental or backup heating systems. The OAS comes standard with the HK2000 Economizer system. The OAS is a versatile device because it can be mounted on an outside wall or an outside air duct. Make sure the OAS is mounted completely outside of the house. Avoid direct sunlight. Do not mount the OAS low to the ground where snow can cover it. Do not mount the OAS close to exhaust vents of any type. Use a dedicated 2 conductor 18 AWG solid copper jacketed thermostat cable to connect the OAS to the zone control system, Economizer or the Smart Humidista