Float Switches

The AguaGuard AG-1200+ offers all of the same industry leading features of the AquaGuard® 1100+ magnetic float switch plus an innovatively designed two-piece clamp, which allows it to be mounted to either the side of a metal secondary drain pan or the rolled edge of a plastic secondary drain pan.

Detects clogged A/C condensate drains and shuts off the system to prevent water damage to floors, walls and ceilings. Can be installed horizontally or vertically, inline or on the primary pan’s auxiliary drain outlet by using the included 3/4” adapter, bushing and cap. Can be installed on a sloping line and does not need to be level or plumb.

All Access® AA1-FS can be installed horizontally or vertically, inline or on the primary pan’s auxiliary drain outlet by using the included 3/4 in adapter, bushing and cap. It can be installed on a sloping line and does not need to be level or plumb.

All Access® AA3 specially designed plastic mounting bracket clips firmly over the edge of most drain pans and the slim-profile AA3 can be installed on primary or auxiliary drain pans. The patented magnetic reed switch allows it to be installed off-center and still function correctly.

All Access® AA2-FS can be installed on the auxiliary outlet of the primary drain pan. The patented magnetic reed switch allows it to be installed off-center and still function correctly. The AA2-FS also provides easy access to the switch for service.

A solid state control designed to help prevent flooding, damage to carpets, walls, furniture, ceilings, etc. Now has a built-in test and reset button for easier installation. Turns system off when detecting moisture due to condensate or drain leaks. One or two drops will cause wet Switch®to turn off a unit, alerting a serviceman to a moisture problem. A lit LED indicates the wet Switch®is activated and has turned the unit off. Reset simply by drying the absorbent pad with a paper towel and pressing the reset switch. Connects to 24 VAC. More than one unit may be connected to a system. 2 amp contact rating. Simple 5 wire installation. Sales displays available.

Designed for use on 3/4 in PVC condensate drain line. Snaps easily over existing drain line tubing and can be glued in place using PVC cement. The SOS electronically senses water near the inside wall of the PVC drain tubing. By locating the SOS with its body away from the normal flow, it can be used to detect a possible overflow condition when the PVC drain line becomes full with water. Like a culvert, the condensate drain line is normally mostly empty with a small amount of water flowing in the lower parts of the horizontal run. Since the sensor component of the SOS only covers part of the tubing, a low volume of flowing water does not activate the switch. The pipe must be full or near full to activate the switch. Mount SOS horizontally, vertically or at any angle. Works with 24 VAC control circuits and typical contactors. When not detecting water, the SOS is normally closed and allows normal air conditioner operation. When water approaches the SOS’s sensor, the switch triggers and th